• FurMark 1.20.7.0
  2019.07.04 - setup (10.3MB)
  Release notes | FurMark hashcodes

• FurMark 1.20.6.0
  2019.06.06 - setup (10.3MB)
  [release notes]
• FurMark 1.20.5.0
  2019.04.10 - setup (9.17MB)
  [release notes]
• FurMark 1.20.4.0
  2019.01.16 - setup (8.95MB)
  [release notes]
• FurMark 1.20.2.0
  2018.12.31 - setup (8.93MB)
  [release notes]
• FurMark 1.20.1.0
  2018.05.15 - setup (8.18MB)
  [release notes]
• FurMark 1.20.0.1
  2018.01.23 - setup (8.16MB)
  [release notes]
• FurMark 1.19.1.0
  2017.10.31 - setup (7.81MB)
  [release notes]
• FurMark 1.18.2.0
  2016.11.08 - setup (5.53MB)
  [release notes]
• FurMark 1.17.0.0
  2015.08.28 - setup (5.25MB)
  [release notes]

• MSI Kombustor
• FurMark ASUS ROG Edition
• EVGA OC Scanner

Version 1.20.7.0 - 2019-07-03
+ added support of NVIDIA GeForce RTX 2060 SUPER and 
  RTX 2070 SUPER.
! updated: GPU Shark 0.14.0.0 and GPU-Z 2.22.0
! updated: ZoomGPU 1.23.2 (GPU monitoring library).


Version 1.20.6.0 - 2019-06-06
* fixed GPU-Z sensors reading.
! updated: GPU Shark 0.13.1.0 and GPU-Z 2.21.0
! updated: ZoomGPU 1.23.1 (GPU monitoring library).


Version 1.20.5.0 - 2019-04-10
+ screen saver/blanking and sleep mode are now
  disallowed when FurMark is running. Use the 
  new command line param /allow_screen_saver 
  to allow screen saver/blanking and sleep mode. 
+ added support of NVIDIA GeForce GTX 1660 Ti 
  and GeForce GTX 1660.
+ added partial support of AMD Radeon VII.
! updated: GPU Shark 0.13.0.0 and GPU-Z 2.18.0
! updated: ZoomGPU 1.23.0 (GPU monitoring library).


Version 1.20.4.0 - 2019-01-16
+ added NVIDIA GeForce RTX 2060 support
! updated: GPU Shark 0.12.4.0
! updated: ZoomGPU 1.22.5 (GPU monitoring library).


Version 1.20.3.0 - 2019-01-15
* fixed the GPU temperature reading on some Radeon
  GPUs like RX 400 series.
! GPU temperature spike filter is now disabled by 
  default.
- removed support of Windows XP.


Version 1.20.2.0 - 2018-12-31
+ added NVIDIA GeForce RTX (2080, 2080 Ti, 2070) 
  and Titan RTX support.
+ added Radeon RX 590 support.
! in GPU monitoring log file, GPU-Z values are 
  used when GPU temperature, GPU core and mem 
  clocks are 0.
! GPU data log polling factor set to 1 (was set 
  to 10 in previous versions). Now GPU data are 
  logged every second when Log GPU data is checked
  in Settings box. This value can be changed in the
  config file (log_gpu_data_polling_factor attribute).
! updated: GPU Shark 0.12.2.0 and GPU-Z 2.16.0
! updated: ZoomGPU 1.22.2 (GPU monitoring library).


Version 1.20.1.0 - 2018-05-15
+ added minimal high-DPI support. FurMark is no 
  longer scaled (blurry effect) on high-DPI devices.
! updated: GPU Shark 0.11.2.0 and GPU-Z 2.9.0
! updated: ZoomGPU 1.21.7 (GPU monitoring library).


Version 1.20.0.1 - 2018-01-23
! updated GPU-Z 2.7.0


Version 1.20.0.0 - 2018-01-18
! changed default thread affinity mask from 2 to 0.
  If needed, the thread affinity mask can be set via
  the command line option /render_thread_affinity_mask=...
+ added 21/9 resolutions: 2560x1080, 3440x1440 
  and 5120x2160.
+ added NVIDIA GeForce GTX 1060 5GB and NVS 810.
+ added NVIDIA Quadro P1000, P2000, P3000 and P4000.
+ added support of NVIDIA TITAN V.
+ added support of NVIDIA GeForce MX130 and GeForce MX110.
! updated: GPU Shark 0.11.1.0 and GPU-Z 2.6.0
! updated: ZoomGPU 1.21.5 (GPU monitoring library).


Version 1.19.1.0 - 2017-10-30
+ added support of NVIDIA GeForce GTX 1070 Ti.
+ added support of AMD Radeon RX Vega 64 and Vega 56.
+ added support of AMD Radeon Vega Frontier Edition.
! updated: GPU Shark 0.10.0.4 and GPU-Z 2.40
! updated: ZoomGPU 1.21.2 (GPU monitoring library)


Version 1.19.0.0 - 2017-04-26
+ added support of NVIDIA GeForce GTX 1080 Ti and TITAN Xp.
+ added support of AMD Radeon RX 580, RX 570.
+ added support of AMD Radeon Pro WX 7100, WX 5100, WX4100,
  WX 4150 and WX 4130.
+ added support of AMD Radeon R7 M360, R7 M340, R7 M260, 
  R7 M460 and R7 M440. 
+ added support of the GTX 1050 for notebook (ID: 0x1c8d).
! update the color of the dynamic background  (red/orange).
! updated: GPU Shark 0.9.11.4 and GPU-Z 1.20.0
! updated: ZoomGPU 1.20.4 (GPU monitoring library)


Version 1.18.2.0 - 2016-11-08
+ added support of GeForce GTX 1050, GTX 1050 Ti, 
  Quadro P5000, Quadro P6000, Quadro M6000 12GB, M6000 24GB, 
  Quadro K620, K1200 and K2200.
! updated: GPU Shark 0.9.10.3 and GPU-Z 1.12.0
! updated: ZoomGPU 1.19.4 (GPU monitoring library)


Version 1.18.1.0 - 2016-09-13
+ added command line parameter to enable or disable the dynamic background (/enable_dyn_bkg=1 or
  /enable_dyn_bkg=0).
! updated: GPU Shark 0.9.10.2 and GPU-Z 1.11.0.
! updated: ZoomGPU 1.19.3 (GPU monitoring library).


Version 1.18.0.0 - 2016-08-24
+ added support of recent GeForce GPUs (GTX 1080, GTX 1070, GTX 1060 6GB, GTX 1060 3GB).
+ added support of recent Radeon GPUs (RX 480, RX 470, RX 460).
* fixed: reading of the current value of the clock speeds on Radeon GPUs.
* fixed: screenshots (F9) are correctly generated (in the new screenshots/ folder).
  In some cases, you have to start FurMark with admin rights to be able to save screenshots.
+ added 5k resolution (5120x2880) to the resolution selection box.
+ added preset:2160 (4k) in the command line options (/preset=2160).
! updated: GPU Shark 0.9.10.0 and GPU-Z 1.10.0.
! updated: ZoomGPU 1.19.1 (GPU monitoring library).


Version 1.17.0.0 - 2015-08-21b>
+ added support of GeForce GTX 950.
! updated Windows 10 detection code.
! updated: GPU Shark 0.9.6.0 and GPU-Z 0.8.5
! updated: ZoomGPU 1.14.0 (GPU monitoring library)